How To Determine Mop Head Compatibility
Jun 04, 2026
Leave a message
Identify the Basic Mop Type
First, determine whether your mop is a rotary type, a folding PVA (sponge) type, or a flat mop type. Mop heads from different categories are completely incompatible, so this is the essential first step.
Ruling out cross-category compatibility-such as the fact that a rotary mop head cannot be attached to a PVA mop handle-helps narrow down the range of suitable replacements.
Check Key Connector Dimensions
Rotary Mops: Measure the outer diameter of the mop handle tip; the mainstream standard is Φ22mm ±0.3mm. Also, confirm the presence of a snap-fit/spiral groove structure; a design matching 3–4 elastic locking slots will fit most standard handles.
PVA Mops: For folding models, measure the length of the mop head (commonly 28cm or 33cm) and the width of the plastic clip at the bottom. For roller models, check the number of screw holes on the black metal clamp and measure the spacing between them; compatibility is ensured if these specifications match.
Flat Mops: Measure the length and width of the mop plate, and ensure the attachment surface (Velcro/adhesive area) or slot positions on the replacement pad align perfectly with the mop plate.
Examine Installation Details
Check the shape of the locking clips and threads. Custom clips or non-standard threads used by certain brands often will not lock securely, even if they look similar.
Some brands feature proprietary designs; for example, certain genuine mop heads from "Magic A-One" (Miaojie) fit only their own mops. Such products are usually marked with specific compatibility information on the packaging and cannot be used across different brands.
Send Inquiry








