Strip Mop Head Refills for Commercial Cleaning

 

Heavy-duty non-woven and microfiber strip refills engineered for quick absorption, low-lint performance, and high-coverage commercial floor care.

 

 
  • Custom Strip Size Mop Head

    Custom Strip Size Mop Head refills deliver precise liquid retention and controlled floor coverage for commercial sanitation routines.

  • Blended Fiber Strip Mop Head

    The Blended Fiber Strip Mop Head is built with a combination of high-absorbency cotton and high-tensile polyester fibers, structured into flat non-woven strips.

  • Reinforced Attachment Strip Mop Head

    Engineered for heavy-duty commercial cleaning and healthcare sanitation, the Reinforced Attachment Strip Mop Head integrates a high-tenacity synthetic mesh core with double-stitched perimeter hems...

  • Long-Strip Mop Head Refill

    The Long-Strip Mop Head Refill combines extended synthetic strand lengths with a double-stitched header band to deliver rapid fluid absorption and wide surface coverage in high-traffic commercial...

  • Narrow-Strip Mop Head

    The Narrow-Strip Mop Head features non-woven or microfiber narrow strips anchored to a heavy-duty banded headband, designed for direct fitment onto standard universal screw and clamp handles.

  • Wide-Strip Mop Head

    The Wide-Strip Mop Head Refill features high-density non-woven composite strips permanently anchored into a reinforced polymer socket to maximize floor contact area during commercial mopping...

 
Category Overview

 

Strip Mop Head Refills feature flat, parallel fabric ribbons attached to a reinforced center head piece. Unlike tube mops—which utilize cylindrical knitted fabric loops to capture heavy debris—strip mops use wide, flat ribbons cut from non-woven or microfiber material. This flat ribbon profile maximizes floor surface contact area under downward pressure, accelerating liquid absorption and streak-free drying. These refills serve as primary cleaning components for healthcare facilities, cleanrooms, and high-traffic commercial spaces requiring rapid fluid pickup and low-linting performance.

 

Custom Strip Size Mop Head

 

Strip Structural Configurations

Strip Width: Standard 35 mm, 45 mm, and 50 mm flat ribbon cut options.


Strip Length: Available in 28 cm, 30 cm, 35 cm, and 40 cm working reach length per side.


Layout Pattern: Radial 360-degree spread anchored around a central attachment core to prevent strand entanglement and maintain uniform pressure distribution.


Head Attachment & Fixation: Ultrasonic welded center bands, molded plastic threaded sockets (Italian thread or US thread), and heavy-duty snap-lock connector caps.

 

Material Options

 

Narrow-Strip Mop Head

Viscose / Polyester Blended Non-Woven

High absorbency ratio (up to 8 times dry weight), ideal for single-use healthcare disinfection and chemical application without cross-contamination.

Long-Strip Mop Head Refill

Split Microfiber Strips

Dense polyester/polyamide blend structure capturing microscopic dust and microorganisms; highly resistant to repeated laundering cycles.

Reinforced Attachment Strip Mop Head

Textured Synthetic Composites

Reinforced embossed surface pattern providing mechanical friction for stubborn mark removal without damaging floor coatings.

 

Technical Specifications & Tool Matching
 

Specification Parameter

Standard Range

Commercial Grade Range

Total Weight

140 g – 180 g

200 g – 350 g

Strip Count

32 – 48 strips per head

50 – 80 strips per head

Absorbency Speed

Under 2.5 seconds

Under 1.5 seconds

Linting Rating

Low-linting (ISO Class 7 cleanroom compatible options)

Ultra-low linting non-woven material

Handle Attachment Compatibility

Standard thread (22 mm – 25 mm diameter handles), Screw-fit, Clip-on adapter

Heavy-duty universal connector, Screw-fit, Clip-on adapter

 

 

Application Scenarios

Healthcare & Infection Control
Non-woven strip refills accommodate strict floor disinfection protocols in hospital wards and clinics, preventing chemical degradation and reducing cross-contamination risks when paired with single-use or high-frequency wash routines.


Commercial Office & Educational Facilities
Microfiber strip refills deliver quick liquid spill absorption and streak-free drying on sealed vinyl, hardwood, and polished concrete floors during regular maintenance shifts.


Foodservice & Janitorial Floor Care
Wide-strip synthetic refills remove grease layer buildup in commercial kitchens and high-traffic corridors while drying floors quickly to limit slip hazards.

Blended Fiber Strip Mop Head

 

Customization Options

Strip Dimensions

Custom ribbon width, length, and strip thickness based on targeted floor coverage requirements.

Color Coding

Red, blue, green, yellow, and custom Pantone colors for hazard-zone color-coded cleaning compliance.

Material Composition

Specific fiber blend ratios (such as 70/30 or 80/20 polyester/viscose blends), custom fabric weights (GSM), and surface embossing patterns.

Packaging & Labeling

Bulk carton master packing, individual polybags with printed barcode labels, display inner boxes, and private label branding.

 

 

FAQ

 

Q: How do I select the right strip width for specific floor cleaning tasks?

A: Wider strips (45 mm to 50 mm) provide larger surface coverage and faster liquid absorption per pass, suited for large open corridors and halls. Narrower strips (30 mm to 35 mm) reduce liquid drag force and fit tighter floor contours or congested office areas.

Q: How do I confirm socket attachment compatibility with existing mop handles?

A: Sockets can be molded with standard European screw threads, US coarse threads, or universal push-in clips. Verify your current handle diameter and connector thread pitch prior to tooling selection; sample adapters are available for verification.

Q: What is the primary operational difference between Strip Mop Heads and Tube Mop Heads?

A: Strip Mop Heads utilize flat non-woven or microfiber ribbons designed for high surface contact, fast liquid pickup, and light-to-medium soil removal. Tube Mop Heads feature round continuous fabric loops that hold more water and tolerate abrasive floor scrubbing without shredding.

Q: Can non-woven strip refills withstand autoclave or bleach-based disinfectant chemicals?

A: Synthetic non-woven strip refills tolerate standard sodium hypochlorite (bleach) dilutions and quaternary ammonium disinfectants without fiber breakdown. For autoclave sterilization, specific heat-stabilized polypropylene blends must be specified.

 

modular-1
Request Commercial Pricing and Customization Details

Contact our product engineering team to discuss material specifications, request physical test samples, or obtain bulk manufacturing pricing tailored to your market demands.

JR Klean Co., Ltd. is one of the most professional strip mop head refills manufacturers and suppliers in China, featured by quality products and low price. Welcome to wholesale durable strip mop head refills made in China here and get quotation from our factory. Customized orders are welcome.

Send Inquiry