Custom Strip Size Mop Head

Custom Strip Size Mop Head

Custom Strip Size Mop Head refills deliver precise liquid retention and controlled floor coverage for commercial sanitation routines.
Send Inquiry

JR Klean Co., Ltd. is one of the most reliable manufacturers and suppliers of custom strip size mop head in China. If you're going to wholesale bulk advanced custom strip size mop head, welcome to get pricelist and free sample from our factory. All customized products are with high quality and low price.

 

Product Overview

 

Custom Strip Size Mop Head refills deliver precise liquid retention and controlled floor coverage for commercial sanitation routines. Manufactured from thermally bonded non-woven blends or high-density split microfiber, each unit features precision-slit material bands tailored to specific length, width, and weight specifications. High-frequency sonic edge sealing prevents fiber fraying during heavy-duty wringing, while reinforced polypropylene headbands interface directly with standard commercial mop frames and handles.

 

Key Features & Procurement Value

 

Custom Strip Dimensions

  • Slitting Process: Slit-width accuracy within ±1 mm, supporting band widths from 15 mm to 40 mm and lengths up to 50 cm.
  • Operational Impact: Balances floor friction resistance and liquid release volume to match operator motion speed.
  • Procurement Value: Fits existing client mop frame configurations without requiring hardware modifications.

 

Double-Stitched Structural Headband

  • Reinforcement Method: Cross-woven synthetic fabric bound with multi-needle lockstitching, tested to withstand ≥ 250 N pull force.
  • Operational Impact: Distributes downward pressure evenly across the strip core and resists tear-out during mechanical wringing cycles.
  • Procurement Value: Reduces premature replacement rates under daily commercial use.

 

Continuous-Filament Non-Woven Substrate

  • Material Bonding: Thermally linked synthetic fibers without chemical adhesives or binders.
  • Operational Impact: Prevents lint separation and residue trailing on smooth epoxy, vinyl tile, and polished concrete floors.
  • Procurement Value: Satisfies hygiene standards for healthcare and controlled room environments.

 

Quick-Release Attachment Interfaces

  • Hardware Fitting: Threaded screw caps, snap-lock plates, or heavy-duty woven tailbands.
  • Operational Impact: Enables tool-free mop head replacement in under 5 seconds.
  • Procurement Value: Decreases labor setup downtime during facility floor turnovers.

 

Specification Matrix

 

Technical Parameter

Factory Standard Range

Customization Limits / Options

Material Composition

Viscose / Polyester Blend (70/30, 50/50), 100% Split Microfiber

Material blend ratios, needle-punch fiber density

Fabric Weight (GSM)

120 g/m² – 280 g/m²

Weight target held within ±5% batch tolerance

Strip Width

20 mm, 25 mm, 30 mm

15 mm to 40 mm custom slitting

Strip Length

30 cm, 35 cm, 40 cm

25 cm to 50 cm custom cut length

Absorbency Ratio

600% – 900% dry weight (ISO 9073-6)

Chemical-resistant or hydrophobic coatings

Interface Fitting

Threaded cap, Snap-fit connection, Flat-band mount

Custom thread pitch and latch molding

Color Coding

Blue, Red, Green, Yellow

Custom Pantone color matching for zoned hygiene

Washing Durability

50 – 150 commercial laundering cycles

Tuned for bleach or quaternary ammonium resistance

Packaging Unit

Bulk polybag, Inner bags in corrugated master cartons

Custom printed packaging and barcode labeling

 

Application & Hardware Compatibility

 

Floor Substrates: Vinyl composition tile (VCT), sealed hardwood, polished concrete, ceramic tile, terrazzo, and anti-slip rubber flooring.


Operational Environments: Hospital wards, isolation zones, educational facilities, hospitality corridors, and food preparation areas.


Hardware Interface Compatibility: Fits standard 15/16-inch threaded handles, commercial jaw-style clamp frames, and quick-release latch poles.

 

Customization Parameters

 

Fiber Selection

Viscose/Polyester non-woven, needle-punched non-woven, micro-denier split microfiber.

Dimensions

Strip length, strip width, total head dry mass, and band count per assembly.

Zone Identification

Color-coded headbands, tailbands, or fabric dye for cross-contamination prevention.

Connector Molding

Custom injection tooling for proprietary handle sockets and locking pin dimensions.

Packaging Configurations

Custom header cards, printed polybags, master carton dimensions, and pallet stacking layouts.

 

Quality Control & Maintenance Protocols

Production Control Standards

  • Headband seam tensile testing at≥ 250 N stress threshold.
  • Continuous optical slitting monitoring maintaining strip width tolerances within ±1 mm.
  • Batch absorption capacity verified per ISO 9073-6 testing methods.
 

Laundering Guidelines

  • Commercial machine wash up to 60°C (140°F) using neutral detergents.
  • Avoid high-pH chemical agents and raw bleach solutions to prevent synthetic fiber degradation.
  • Tumble dry on low heat settings under 60°C.
 

Related Products

Microfiber Strip Mop Head Refills

Non-woven Flat Mop Pads

Aluminum Telescopic Mop Handles

 

Frequently Asked Questions

 

Q: What strip width is recommended for disinfectant application in healthcare environments?

A: A 20 mm to 25 mm strip width provides balanced liquid retention and rapid fluid release when applying chemical disinfectant solutions across smooth healthcare floors.

Q: Can the mounting cap be customized to fit a non-standard handle connection?

A: Injection molds are produced to match specific thread pitch, socket depth, and locking mechanism specifications provided via technical drawings or sample physical hardware.

Q: What dimensional tolerance is maintained across mass production runs?

A: Automated slitting and cutting equipment maintains strip width tolerances within ±1 mm and strip length tolerances within ±5 mm.

Q: How does non-woven material performance compare to split microfiber in daily use?

A: Non-woven material provides low-linting performance and quick fluid release suited for single-use or limited-reuse tasks, whereas split microfiber provides higher physical particle pickup and withstands repeated laundry cycles.

Q: What technical details must be confirmed to initiate a custom order quote?

A: Quote generation requires confirmation of material type, target GSM, strip width and length dimensions, connector attachment type, color requirement, and total order volume.

Hot Tags: custom strip size mop head, China custom strip size mop head manufacturers, suppliers, factory

Previous:No Information

Send Inquiry