
Wide-Strip Mop Head
JR Klean Co., Ltd. is one of the most reliable manufacturers and suppliers of wide-strip mop head in China. If you're going to wholesale bulk advanced wide-strip mop head, welcome to get pricelist and free sample from our factory. All customized products are with high quality and low price.
Product Overview
The Wide-Strip Mop Head Refill features high-density non-woven composite strips permanently anchored into a reinforced polymer socket to maximize floor contact area during commercial mopping operations. The 40mm wide strip design increases surface coverage per stroke compared to conventional narrow-strip refills, reducing total transit time across large floor areas. Engineered specifically for demanding healthcare and institutional environments, this refill combines rapid fluid absorption with edge-sealed fiber construction to prevent linting on polished surfaces. It connects directly to standard industrial handles, providing a durable solution for routine sanitization and floor care routines.
Key Features & Procurement Value
40mm Wide-Strip Configuration → Increases surface contact footprint per sweep → Reduces labor time and operator fatigue in high-square-footage corridors.
Thermal-Bonded Non-Fraying Edge → Seals fiber edges without loose threads → Prevents lint residue on polished VCT, epoxy, and ceramic tile flooring.
Heavy-Duty Threaded Poly Socket → Resists structural cracking and thread stripping during aggressive mopping movement → Minimizes replacement frequency caused by interface hardware failure.
Capillary Fluid Absorption Matrix → Holds up to 6.5 times its dry weight in liquid → Accelerates spill pickup and enables controlled chemical application across large surface areas.
Color-Coded Material Options → Enables strict visual segregation across critical environmental zones → Helps facilities meet color-coding protocols to limit cross-contamination risks.
Technical Specifications
|
Specification Parameter |
Value / Technical Standard |
|
Product Category |
Wide-Strip Mop Head Refill |
|
Fiber Composition |
Viscose / Polyester Blend (Standard: 50/50; Custom: 30/70 to 70/30) |
|
Head Gram Weight |
220g, 280g, 320g, 350g (Tolerance: ±5%) |
|
Strip Dimensions |
Width: 40mm |
|
Absorption Capacity |
5.5x – 6.5x dry weight (ASTM D1117 test standard) |
|
Connection Interface |
Universal Screw-On Thread (23.5mm Acme/Italian) / Clamp Socket |
|
Color Availability |
Blue, Red, Green, Yellow, White |
|
Launderability |
Up to 80 commercial wash cycles at <60°C |
|
Standard Packaging |
Compressed inner polybag; 50 pieces per master export carton |
Applications & Interface Compatibility
Cleaning Operations: Wet mopping, chemical floor disinfection, spill containment, and floor finish application.
Substrate Suitability: Vinyl Composite Tile (VCT), polished concrete, terrazzo, glazed ceramic tile, and seamless epoxy coatings.
Hardware Interface: Fully compatible with standard 23.5mm aluminum mop handles, threaded fiberglass handles, and universal janitorial clamp frames.
Customization Capabilities
Fiber Blend Adjustment: Custom ratios of synthetic to natural fibers tailored to specific chemical exposure requirements.
Gram Weight & Length: Custom total head weight from 200g to 400g to meet specific regional tender specifications.
Interface Styling: Standard Acme threaded sockets, push-fit sockets, or band-head configurations matched to existing handle stocks.
Private Labeling & Packaging: Custom header cards, barcode printing, inner bags, and branded master cartons.
Quality Control & Maintenance Guidelines
Quality Inspection Points: 100% tensile pull testing on socket-to-strip joints, weight tolerance validation per batch, absorption speed testing, and needle-detector screening.
Manufacturing Process Controls: Automated ultrasonic cutting and thermal edge-bonding to eliminate loose threads and dimensional variance.
Washing & Storage Instructions: Rinse thoroughly with clear water after chemical exposure. Machine wash in temperature under 60°C; do not use chlorine bleach or fabric softeners. Air dry or tumble dry on low heat (<50°C). Replace head when strip fiber loss exceeds 25%.
Related Products
Non Woven Mops,
Microfiber Cloths,
Aluminum Mop Handle
Frequently Asked Questions
Q: What handle thread pitch is used on the socket interface?
A: The socket utilizes a standard 23.5mm universal Acme thread compatible with standard commercial aluminum and fiberglass mop handles.
Q: How does the wide-strip design compare to narrow-strip refills in cleaning efficiency?
A: The 40mm strip width provides a larger surface area per pass, which covers floor space faster and reduces mopping drag compared to standard 20mm narrow strips.
Q: What is the primary material advantage of a viscose-polyester non-woven blend?
A: Viscose provides rapid liquid absorption and retention, while polyester adds tensile strength and abrasion resistance against rough tile surfaces.
Q: Can we request custom gram weights for specific institutional cleaning tenders?
A: Yes, head weights between 200g and 400g can be produced to meet exact target weight specifications required in tender documents.
Q: What laundering parameters maintain the fiber integrity of this mop head?
A: Machine wash below 60°C using neutral detergents. Avoid bleach and high-temperature drying to preserve capillary absorption channels.
Hot Tags: wide-strip mop head, China wide-strip mop head manufacturers, suppliers, factory
You Might Also Like
Send Inquiry








