Tube Mop Head Refills for Professional Floor Cleaning

 

Tubular microfiber replacement mop heads engineered for high-absorbency commercial mopping and healthcare sanitation.

 

 
  • Custom Length Tube Mop Head

    Constructed from continuous-filament tubular non-woven or microfiber fabric stitched into a closed-loop configuration, the Custom Length Tube Mop Head eliminates loose yarn ends to prevent...

  • High Absorbency Tube Mop Head

    Constructed with continuous looped synthetic yarns in a tubular knit geometry and secured by a mid-stitch tailband, the High Absorbency Tube Mop Head prevents strand fraying, tangling, and lint...

  • Short-Strip Tube Mop Head

    The Short-Strip Tube Mop Head utilizes a knitted tubular yarn construction paired with a reinforced headband and tailband configuration, preventing fraying and lint shedding during intensive floor...

  • Long-Strip Tube Mop Head

    The Long-Strip Tube Mop Head features a continuous tubular microfiber mesh structure, held in position by a heavy-duty polyester headband and a bottom tailband.

  • Reinforced Seam Tube Mop Head

    The Reinforced Seam Tube Mop Head combines continuous-loop microfiber tube yarns with double-stitched perimeter seams to eliminate edge blowout and fiber shedding during heavy commercial laundering.

  • High-Density Tube Mop Head

    The High-Density Tube Mop Head features a continuous-loop tubular microfiber yarn structure stitched to a reinforced mesh headband.

 
Category Overview

 

Tube Mop Head Refills feature continuous tubular yarn loops rather than traditional flat strips or twisted cut-end strands. This continuous hollow-core structure eliminates loose fiber ends, preventing edge snagging on floor transitions and reducing lint deposition. Designed for janitorial distribution, commercial facility management, and institutional hygiene procurement, these replacement heads increase fluid pick-up capacity and floor contact coverage per stroke.

 

High Absorbency Tube Mop Head

 

Structural Breakdown

Tubular Microfiber Strands: Continuous circular knit yarn construction traps particulate debris within the hollow core while reducing surface drag resistance on textured tiles.


Reinforced Mesh Headband: Heavy-duty double-stitched mesh fabric allows rapid liquid drainage and fastens securely to standard side-gate or clamp-style mop handles.


Bottom Tailband: Industrial-grade synthetic binding maintains uniform strand spacing across the entire floor footprint, eliminating tangling during high-speed mopping.


Stress-Point Stitching: Multi-needle bar-tack reinforcement at high-stress junctures prevents seam separation during mechanical wringing and heavy-duty extraction.

 

Materials & Specifications
 

Parameter

Standard Specification

Customization Options

Yarn Composition

80% Polyester / 20% Polyamide composite fiber

Custom blends available upon request

Mop Head Weight

350g, 400g, 450g, 500g, 600g

Variable weight targets per specification

Strand Structure

8 mm – 12 mm continuous hollow tubular loops

Custom strand density and thickness

Headband Type

5.0-inch wide mesh / 1.25-inch narrow band

Custom mesh material or solid vinyl tape

Tailband Configuration

Single or dual heavy-duty woven straps

Optional sizing or color matching

Color Coding Options

Blue, Green, Red, Yellow, White

Custom yarn dyeing per HACCP guidelines

 

 

Performance & Laboratory Evaluation

Absorbency & Fluid Retention: The internal capillary effect of the hollow tubular structure holds up to 6 times the dry weight of the mop in liquid, releasing cleaning solution evenly under handle pressure.


Friction & Glide Resistance: The round continuous yarn surface lowers surface drag on non-slip safety flooring compared to standard twisted cotton strands, reducing operator fatigue during long shifts.


Linting & Particle Control: Circular knit construction locks in filament ends, maintaining near-zero lint release during wet scrubbing in controlled or sensitive environments.


Laundry Durability: Withstands commercial laundering cycles at water temperatures up to 90°C without significant strand shrinkage, structural unraveling, or loss of liquid pickup.

Short-Strip Tube Mop Head

 

Recommended Application Environments

Healthcare Facilities

Suitable for color-coded cross-contamination prevention on sheet vinyl, rubber flooring, and sealed hospital corridors.

Commercial Office Buildings

Designed for daily damp mopping and spill management across large-scale porcelain tile and terrazzo surfaces.

Educational Institutions

Built for heavy-duty daily maintenance in high-traffic hallways, cafeterias, and multi-purpose rooms.

Hospitality & Food Service

Applied for grease removal and chemical floor sanitization on quarry tile and commercial kitchen flooring.

 

Maintenance & Replacement Guidelines
 
High-Density Tube Mop Head
 

Pre-Wash Rinsing

Flush out heavy abrasive soil and chemical residues with cold or warm water prior to standard machine washing.

 

Washing Protocol

Machine wash using standard commercial detergent at temperatures up to 90°C. Avoid chlorine bleach and fabric softeners to preserve fiber capillary performance.

Reinforced Seam Tube Mop Head
Long-Strip Tube Mop Head
 

Drying Parameters

Tumble dry on medium heat below 60°C or hang dry in a well-ventilated area to prevent thermal degradation of synthetic filaments.

 

Replacement Criteria

Replace mop heads when tubular strands become permanently matted, headband mesh tears, or fluid absorption capacity decreases by more than 20%.

High-Density Tube Mop Head

 

 

FAQ

 

Q: How does the tubular mop structure differ from standard wet mop strands?

A: Tubular mop strands consist of continuous knit fiber loops formed into hollow cylinders. Unlike open cut-end or twisted yarn mops, tubular strands do not fray, unravel, or leave loose lint behind, while offering smoother gliding over rough surfaces.

Q: What headband width should be specified for existing mop handles?

A: Wide headbands (5 inches) are engineered for side-latch and jaw-style mop handles, providing broader grip stability. Narrow headbands (1.25 inches) fit standard stirrup or quick-release wire handles.

Q: Are Tube Mop Head Refills compatible with commercial laundering protocols?

A: Yes. The synthetic blend and reinforced multi-stitch construction withstand industrial washing and drying cycles up to 90°C without fiber breakdown or seam separation.

Q: What is the benefit of color-coded tube mop heads?

A: Color-coded refills (Red, Blue, Green, Yellow) align with HACCP and international sanitation standards to segment cleaning tools by zone, preventing cross-contamination between restrooms, kitchens, and patient care areas.

Q: Can these mop refills be customized for specific private-label requirements?

A: Yes. Yarn weight (350g–600g), headband color, stitch thread, tailband print, packaging layout, and barcode labeling can all be customized to exact OEM buyer specifications.

 

modular-1
Partner with an OEM Manufacturer for Custom Tube Mop Head Refills

Request factory-direct pricing, custom material specifications, or sample evaluations for your bulk commercial cleaning supply requirements.

JR Klean Co., Ltd. is one of the most professional tube mop head refills manufacturers and suppliers in China, featured by quality products and low price. Welcome to wholesale durable tube mop head refills made in China here and get quotation from our factory. Customized orders are welcome.

Send Inquiry