
Reinforced Edge Flat Mop Pad
JR Klean Co., Ltd. is one of the most reliable manufacturers and suppliers of reinforced edge flat mop pad in China. If you're going to wholesale bulk advanced reinforced edge flat mop pad, welcome to get pricelist and free sample from our factory. All customized products are with high quality and low price.
Product Overview
The Reinforced Edge Flat Mop Pad features high-density synthetic split fibers integrated with double-stitched perimeter bias binding to eliminate seam breakdown during thermal laundry cycles. Built with a structured multi-layer core and thermal-resistant hook-and-loop backing, it maintains dimensional stability and uniform contact pressure across hard floor surfaces.
Key Features & Purchasing Value
Double-Stitched Perimeter Binding
Heavy-duty polypropylene bias tape locked with double-overlock stitching secures all core layers, preventing edge unraveling during high-temperature washing and mechanical extraction.
Split Microfiber Matrix
Continuous synthetic split filaments retain fine particulate matter and liquid chemical solutions on initial contact, reducing required stroke repetition per cleaning area.
Thermally Bonded Multi-Layer Core
Internal fluid-retention layers are thermally bonded to prevent inner bunching, shifting, or separation when wrung through commercial flat mop presses.
High-Tack Hook-and-Loop Backing
Heat-stabilized backing fabric maintains frame grip after repeated exposure to cleaning chemicals and laundry drying up to 90°C, preventing pad slippage during operation.
Technical Specifications
|
Parameter |
Specification |
Test Method / Tolerance |
|
Fiber Composition |
80% Polyester / 20% Polyamide |
Split microfiber yarn |
|
Fabric Weight |
450 g/m² |
Tolerance: ±5% |
|
Standard Dimensions |
40 cm x 14 cm / 60 cm x 14 cm |
Fits standard commercial frames |
|
Perimeter Construction |
Double-stitched polypropylene binding |
Overlock seam execution |
|
Attachment Interface |
Full-surface hook-and-loop backing |
Heat-stabilized synthetic backing |
|
Liquid Absorption |
550% of dry pad weight |
Tested per ISO 9073-6 |
|
Laundering Durability |
Tested up to 300 cycles |
At 90°C washing / low-heat tumble dry |
|
Chemical Resistance |
Compatible with Quats, Hydrogen Peroxide |
Neutral pH to mild alkaline cleaning agents |
|
Packaging Configuration |
100 pieces per master carton |
Sealed inner polybag lining |
Application & Frame Compatibility
Suitable Working Environments
- Healthcare Facilities: Patient care rooms, corridors, and sterile zones utilizing standardized isolation cleaning protocols.
- Commercial Buildings: Educational institutions, retail centers, and office complexes handling daily high-volume foot traffic.
- Hard Floor Substrates: Sealed vinyl composition tile (VCT), polished concrete, glazed ceramic tile, terrazzo, and smooth resin floors.
Mop Frame Interface
- Mounts on standard 40 cm and 60 cm aluminum or plastic flat mop frames.
- Attaches directly to high-tack hook-and-loop plate systems, pocket-style frames, or folding latch mechanisms.
Customization & OEM Capabilities
Fabric Density Range: 300 g/m² to 600 g/m² options tailored to targeted liquid absorption specifications.
Color-Coded Edge Binding: Red, blue, green, and yellow perimeter binding options to support color-coded cross-contamination prevention systems.
Attachment System Modifications: Integration of dual-end pockets, side tabs, or continuous hook-and-loop backing.
Private Label Integration: Sewn-in custom brand tags, batch-tracking barcode labels, and printed shipping cartons.
Quality Control & Maintenance Guidelines
Factory Inspection Protocols
- Seam Tensile Testing: Pull-strength evaluation applied across perimeter binding joints to confirm structural resistance against shear stress.
- Thermal Shrinkage Verification: Batch samples subjected to 90°C washing cycles to verify size change remains within the maximum 3% allowable limit.
- Gravimetric Fluid Capacity Check: Measuring total fluid uptake speed and saturation limits per batch lot prior to packaging.
Laundering & Care Instructions
- Launder prior to first use to expand synthetic fiber bundle structures.
- Exclude silicone-based fabric softeners and high-concentration chlorine bleach to prevent fiber breakdown and absorption loss.
- Machine wash up to 90°C; tumble dry on low heat settings or air dry.
Related Products
Non-Woven Disposable Flat Mop Pads
Color-Coded Microfiber Cleaning Cloths
Aluminum Telescopic Mop Handles
Heavy-Duty Commercial Flat Mop Frames
Frequently Asked Questions
Q: What structural detail prevents the edges of this mop pad from unraveling after repeated industrial washing?
A: The edges are encased in woven polypropylene binding tape and locked with double-overlock stitching. This construction seals the raw edges of internal core layers and exterior fabrics together, preventing unraveling during thermal washing and extraction.
Q: Is this microfiber pad compatible with healthcare disinfectants?
A: The synthetic polyester and polyamide fibers resist chemical degradation from quaternary ammonium compounds, hydrogen peroxide solutions, and neutral detergents.
Q: What is the standard production lead time for custom color-coded binding orders?
A: Custom color-binding orders require approximately 20 to 30 manufacturing days following sample approval and raw material dye lot confirmation.
Q: How does GSM selection impact floor cleaning performance?
A: Higher GSM fabrics (500–600 g/m²) hold larger volumes of liquid for extended area coverage per pass, whereas medium weight fabrics (400–450 g/m²) reduce manual push-pull resistance and dry faster after laundering.
Q: What details should be provided when requesting a customized private-label quote?
A: Specify required pad dimensions, target GSM, edge color requirements, attachment backing type, estimated order quantity, and artwork files for sewn-in labels or master cartons.
Hot Tags: reinforced edge flat mop pad, China reinforced edge flat mop pad manufacturers, suppliers, factory
You Might Also Like
Send Inquiry








